How to Unlock Push and Twist Button Door Lock

How to unlock push and twist button door lock Overview

Materials or Products required for this job

How do you open a twist lock?

How to unlock push and twist button door lock( step by step) without missing any step.

  1. Insert the key and turn it from the top until you hear a click sound, then pull up on the key to try and disengage lock.
  2. If that doesn’t work, try inserting the key at a different angle until the locking mechanism pops open.
  3. If that didn’t work, try inserting a flathead screwdriver in between the key and lock mechanism to force it open.
  4. If that didn’t work, try trying a different key.
  5. If all else fails, you could try getting down on your hands and knees and pulling the door open from the bottom.
  6. Finally, if you don’t want to get down on all fours, try drilling a hole above the lock and using an extension on your drill to unlock the door.
How to Unlock Push and Twist Button Door Lock Tips

Important tips, tricks, and warnings if any about the job after step by step guide.

  1. When forcing open a lock with a screwdriver or drill, turn it gently at first so that it doesn’t break off in the lock.
  2. If you’re removing a door knob, replace it with a doorknob that has a hole for a screwdriver.
  3. If the door can be forced open from the bottom, install a wood plank along the lower portion of the wall to keep someone from pushing in your door from below.
  4. If you’re drilling above your lock and inserting an extension on your drill, make sure to use an extension cord so if the drill breaks or falls it hits the ground instead of someone’s hand or foot.
  5. Be careful when pulling door open from the bottom, as you could damage or break your door.

How to Unlock a Push Lock Door Without a Key

If you are locked out of your house and have forgotten the key to your push lock door, you can try unlocking it with a bobby pin. To do this, you must bend the bobby pins so that they can be inserted into the lock and turned. You can also use a rake that has a hook on the end. To turn the lock, you should twist the rake and pull it towards you in a circular motion. Then, the lock should pop open.

Another way to unlock push locks is to use a screwdriver. To do this, you must insert a screwdriver in the keyhole, and twist it with the help of your hand. Then, you need to put the screwdriver into the keyhole, and the door will unlock in a few seconds. To use this technique, you need to keep a screwdriver with a flat head in a pocket, and a sharp knife.

To open the door without a key, you need to remove the privacy handle from the door. To do this, you need a small screwdriver or a thin bamboo skewer. You should make sure that the skewer has a flat head. However, this method will not work on high-security doors. To unlock a push lock door with a screwdriver, you must use an Allen wrench with a flat head. You can use a screwdriver to remove the mounting screw, and then turn the knob in the desired direction. This technique will be effective in most cases, but it won’t work on high-security doors.

How Do You Open a Twist Lock Door?

The most common question that people ask is how to open a twist-lock door. It’s not a difficult problem, but you should be able to figure out the right method for you. To unlock the door, the first step is to get along, thin object. You should place it in the hole opposite the lever. To do this, you can use the pen filler thing that comes in disposable Bic pens. Just make sure you unzip the outer casing before using it.

To open a twist-lock door, you need to insert a plastic card into the hole. Then, fold the hanger around the bolt, turning it clockwise with one hand while holding the door. When the card is inside the hole, push the door out and the plastic card will pop out. To open the door, insert the wire through the hole and turn it until the handle unlocks the door.

If you can’t find an Allen wrench, you can use the pen filler thing from disposable Bic pens. The pen filler thing needs to be removed from the casing first. You should then insert the wire into the hole and push it through the lever. Once you have pushed the plastic card through the hole, you should be able to open the door. However, this method only works if you have no gap between the door and the wall.


In conclusion, locking and unlocking doors can be a pain sometimes, especially when you are in a hurry. However, if you followed this guide, then you shouldn’t have any difficulties opening your door if you ever get locked out of your home or office. Read about using OxiClean here.

Recent Posts